SafeZone Protect30 Perimeter Security
The threat of terrorism is ever increasing and a better protection of people and properties is needed. SafeZone Protect30 is developed to prevent heavy vehicle intrusions into areas that need to be protected.
SafeZone Protect30, successfully tested according IWA14-1/ASTM F2656, consists of barriers, variable angle pieces and gates for pedestrian passing. SafeZone Protect30 is made from high quality S355 steel and is reinforced with high strength steels. SafeZone Protect30 delivers maximum protection and is easy to setup using the QuickLink system.
- 50kmh (30mph) 7.2 ton tested
SafeZone Protect30 is supplied in light pre-mounted elements of 5.8 m long. The height of the barrier is approximately 806 mm. SafeZone Protect30 has a unique QuickLink connector for a quick installation. It is even possible to move elements of 11.6 or 17.4 m at the same time.
SafeZone Protect30 comes in preassembled low weight 19ft. sections. The height of the barrier is approximately 2’8”. SafeZone Protect30 has a unique QuickLink connector, allowing fast installation. It is even possible to move 38 or 57foot strings of barriers at once.
The SafeZone Protect30 is very easy to install and is anchored into asphalt or concrete. Because of the use of high quality S355 steel reinforced with high strength steel the barrier is capable of high impacts. For even more strength the top is reinforced with a U-bar. The SafeZone Protect30 was successfully tested according IWA14-1/ASTM F2656, which corresponds with a 30mph 90 degrees impact of a 7.2 ton truck. SafeZone Protect30 stopped this vehicle within 7ft.
- Protect vulnerable sites
- IWA14-1/ASTM F2656
- Relatively low weight
- Quicklink connectors
- Quick and easy intallation
- Maintenance free
|Product||Testnorm||Vehicle class||Impact speed||Impact angle||Test result||Dynamic penetration rating|
|SafeZone Protect||IWA 14-1||N2B||30mph||90||Pass|
|SafeZone Protect||ASTM F2656||C7||30mph||90||Pass||7ft. (Designation P2)|